Recognize And Understand Home Networking Components


You will eventually look to connect several computers in your home, if you aren’t convinced about it now. It is crucial to have the necessary understanding of what is needed to connect your computers to one another.

You must first decide which network suits you the most. The Wireless network shouldn’t be taken into account if your computer is in the same room. The wired cable network will function properly.

The HomePNA Network makes it simple to network computers that are close to one another but cannot be seen since they have phone jacks close to one another.

While if the wall outlets are close by, PCs apart from one another may be connected via the powerline network.

The more expensive Wireless Network is the best option when there are computers spread out over numerous rooms and you require the convenience of transferring devices easily from room to area.

Knowing what components you’ll need is a tremendous help once you’ve chosen the type of network that’s best for your requirements.

Let’s examine each network and the parts that are necessary to set it up and function.


The fundamental network kit can link computers that are located close to one another.

Make careful to open any kit or component you buy, and watch out not to scuff up the package it came in.

Making it simpler to return the device should you need to is the idea behind that.

The network, which is perceived as two NICs, can be operated using instructions and software provided in basic kits.

These NICs, also known as Network Interface Cards, are inserted in a vacant slot inside the systems unit.

The card will be inserted in the PCI slots, and there are USB adapters as well.

Cables will be needed for the network to link PCs. You should look for Cat 5 cables, often known as Category 5 cables.

Ethernet networks come in two different speeds, 10 and 100 mbps, which stands for megabits per second.

A Hub or Switch is necessary for the wired network to control traffic between all systems.

You should connect using a Switch rather than a Hub if you want quick connectivity and folks who don’t.

The majority of systems come with Special Bridging Software, which connects systems, if you want all computers to be connected to the internet.

Network for Wireless Homes

Radio frequency is used by wireless networks to transmit and receive data.

You will have the choice of both wireless and wired connectivity thanks to wireless networks.

The infrared or IR frequency could be utilised if your PCs are right next to one another.

Computers may be found practically anywhere, and the great majority of wireless networks use radio transceiver technology.

For every PC on your network to be connected, you’ll need a wireless router.

Every PC in the network needs a wireless NIC card installed.

When purchasing your wireless kit, pay attention to the indoor range.

This is evident when you examine the wireless router; in the event that a problem arises with the wireless component, you have the choice of wiring your devices together.

The difference between wired and wireless nics should be noted. the cards with wireless NFC.

NETWORK for Powerlines

The electrical wiring in your home is used by the powerline network to transfer data from and to each computer.

The speed of current powerline networks ranges from 50kbps (kilobits per second) to 350kbps.

The disadvantage of this network is that it generates a lot of electrical noise, which can reduce its speed.

And if they have the ability, other PC users can watch your machine.

For data transfer over the network, each machine must have a nic device and an internet router.

For connectivity to the internet, a bridge is needed.

You can utilise these Bridges in addition to your Router.

A telephone network

The same components that you need for your home network are required for you. The components needed for a wireless network are not far from a home network. For people who use it at home, the 10Mbps network is typically adequate.

In order to share Internet access and send data to each computer via an internet phone network, computers are connected to an Ethernet switch, gateway, or router.

This networking is regarded as being the simplest to set up.

Every PC has a phoneline network adapter installed. The most common adapter used by phoneline networks is the USB port connection, sometimes referred to as the Universal Serial Bus port connection. It might be necessary to use a phone filter to reduce line noise. if you want to use a single phone jack to connect a phone and a line. You must purchase a line splitter. Ensure that the phone jack is accessible from every computer connected to the network.

Telephone Network The phoneline network is regarded as more affordable. When compared to Powerline, it is faster and more dependable. Powerline system.

In summary, each network will need a certain kind of adapter to be plugged into the computer.

To transport data, each network will need a switch, hub, or adapter.

The required software will be included with Windows 98, ME, and XP to enable everything to function together.

Driver software for devices that enables the hardware to communicate with the computer will be included with adapters and other devices.

We’ve briefly examined the hardware needed to connect up to two PCs.

We connected our computers wirelessly, which made connecting to the device simple.

Learn as much as you can about networking on PCs; you’ll be glad you did when you need to troubleshoot a computer.

We must understand how each component is configured and connected after we have seen the fundamental network components.

Then, using a DSL or cable modem, we’ll see how data can be shared among multiple devices and the internet with broadband.

Don’t forget to enjoy yourself while exploring your computer by completing all of the tasks you can without endangering the hardware.

Leave A Reply

Your email address will not be published.